Track Shoe for BAUER BG24 Piling Rig

We specialize in producing high-quality rotary drilling rig undercarriage parts that are suitable for various renowned brands, such as Bauer, Soilmec, Casagrande, IMT, CMV, Mait, Sany, XCMG, Zoomlion, Sunward, Liebherr, etc.

1. Tensioning cylinder failure. Check if there is no lubricating oil in the tensioning cylinder and if there is any oil leakage. 2. The track is severely worn. Long term use can also cause the wear of chain ribs and chain barrels on the track to cause the track chains to detach.

Track Chain Assy for Shipment of Bauer Undercarriage Parts Date: 10th, Apr, 2023 Bauer Rotary drilling rig undercarriage parts

As rotary drilling rigs are mainly used for drilling operations, rarely move over long distances. Therefore easy to neglect its track shoe assy maintenance. However, once the track shoe assy failure will be caused by downtime loss, so the track shoe assy maintenance and inspection is very necessary.

1. Operators must undergo professional training, possess relevant professional knowledge, and fully understand the structure and performance of the drilling rig. And proficient in operating methods and basic knowledge of drilling, only after passing the assessment can the machine be operated.

The track roller mainly serves as a support and is located between the lower surface of the left/right beam of the underframe and the crawler. Depending on the tonnage of the machinery, there are usually 5-10 track rollers on each side.

1. Check the oil level of each running assembly before drilling.2. Check all connecting bolts and fastening studs, and tighten them in time in case of looseness. 3. Check whether there is oil leakage, water leakage and air leakage in all parts.

Track shoes are common walking parts of construction machinery, and are also one of the main parts that are easy to wear. They are widely used in crawler crane, piling machine, bulldozer, and excavator.

1. One Machine Can Be Used for Multiple Purposes to Realize Multiple Drilling Methods. Firstly, the design of large pile hole and foundation construction drilling rig makes full use of hydraulic transmission technology, adopts modular combination design method, and realizes multi-purpose of one machine without changing the main machine, so as to meet the adaptability of large construction machinery to different construction methods.

1. When unwinding and installing the wire rope In order to prevent damage to the wire rope lay structure, the correct method should be adopted; In addition, when winding the wire rope to the drum, do not make the surface of the wire rope with sand. So as not to aggravate the wear, affect the life of the wire rope.